Deutsch francais english Foldable loom 70 cm weaving width, 4 harnesses
Home > Price list > Foldable loom > photos
Start assembling the beater.
Put the beater in place (left and right there is a hole in the
middle of the lateral lath) between the 2 sides of the loom.
Place the foot bar with the treadles under the loom. Insert the
wire ends of the bar on the left and right into the hole at
the bottom of the front leg.
Do not screw all that too tight, beater and foot bar must still be able to turn.
Put the cloth beam and warp beam in place
between the 2 sides of the frame.
Fix the bottom cross bar
(the bar with the 4 lams).
Fix the upper cross bar . Place a nut on the bolt of the turning point
of the beater, but do not tighten.
Put the ratchet wheels on the cloth and warp beam and fix with a Allen screw.
Fix back beam and breast beam with screws.
Fix the roller with shafts
with 2 Allen screws.
Make the connections between shafts and lams
and between lams and treadles.